Design Basics: 13 x 11 Legacy Storybook


Whether designing from a template or completely from scratch, there are a few things you need to know about when creating a custom 13 x 11 Legacy Storybook. The tips in this article will help you understand the Design Guide in Studio and what to expect in your published project. 



The Design Guide:

When you first open Studio to work on your project, the Design Guide is visible on any page and can be a bit overwhelming. It is important to read and understand the tips and guide areas for each product type. If you have read and understand the tips laid out in the Design Guide, you can hide the tip bubbles by clicking the Design Guide button in the upper right-hand corner of the Studio window.


13x11_FC_all_2_cropped.png       13x11_left_all_2_cropped.png


On the left is a view of the Design Guide on the Front Cover of a storybook and on the right is a view of the Design Guide on an interior, left-hand page. You will notice some differences in what is shown on each type of page.


safe_area_tip_COVER.png safe_area_tip_PAGE.png


The Safe Area is designated by a purple dashed line around the edge of the design space in Studio. It falls about 1/8 inch to the inside of the edges of a project. Projects look better when words, photos and borders aren't sitting right on the edge of the paper. To avoid this, keep text, photos, and borders well to the INSIDE of the safe area. On the left is the Safe Area as shown on the Front Cover, on the right is the Safe Area as shown on an interior page. 



crop_area_tip_COVER.png crop_area_tip_PAGE.png


The Crop Marks indicate where the page will be cut. However, cutting is not 100% precise. That's why we have the Safe Area and the Bleed Area. These provide us with some necessary allowances in the cutting process. On the left is the Crop Area as shown on the Front Cover, on the right is the Crop Area as shown on an interior page. 


bleed_area_tip_COVER.png bleed_area_tip_PAGE.png


Projects are printed on paper larger than the final cut area. That's why we have marks for the Bleed Area. The Bleed Area on your project is represented by the gray border surrounding the page. Your background paper, background art or anything that you want to come completely to the edge of your cut project needs to extend all the way through the bleed area. Otherwise, you might end up with white edges. On the left is the Bleed Area as shown on the Front Cover, on the right is the Bleed Area as shown on an interior page. 





Notice that the Bleed Area shown on the Front Cover is much larger than the Bleed Area shown on an interior page. The cover of a 13 x 11 Legacy Storybook is printed on a dust jacket. The physical cover of the book is high-quality black leather. See more info on the printed dust jacket and leather cover below.

On the inside of the dust jacket cover, you can see that the edge of the cover design wraps around the edge of the dust jacket, as shown above. This printed area is the Bleed Area, as designated by the grey area in Studio. If you do not design fully through the Bleed Area, then your design may not wrap fully around the edge of your dust jacket cover. 





This tip bubble lets you know that, depending on the size of your monitor, you are likely not viewing your storybook at its full size while designing in Studio. To make sure that your design elements are not too large or too small, it is good to adjust the zoom tool at the top center of the page to 100% every so often. Just grab the triangle on the slider bar and slide it to zoom in or out until you reach 100%. 



This tip bubble is to point out that you may view your storybook pages as a two page spread by clicking the "Preview" button in the top, left-hand area of your Studio window. 




To add, duplicate, remove, or rearrange pages in your storybook, you will click the "Manage Pages" button in the upper, right-hand corner of your Studio window. This will open the Manage Pages tool. For more information, click  here or go to



The Spine and Binding Area: 

While designing a Storybook, you will notice a large area sectioned off on the side of every page. This area is the external Binding Area of the book. If you have never seen one of our Legacy Storybooks in real life, this is what the binding area looks like on the dust jacket that wraps around the outside of the book:



Note that you can also see how spine text will be positioned on your book. For more information about adding text to the spine of your Storybook, click  here or go to


In the above image, you can see the binding of the storybook and the way the dust jacket wraps comfortably around the outside. 


This is what the Spine Area looks like on the Front Cover (right) and Back Cover (left) while designing in Studio. Anything that is added to the "Spine Area" (marked by a red dashed outline in Studio) will appear in the Spine Area on the outside of the finished book. The red "Spine Area" text does not print on your book. 


The Binding Area, or Gutter, on the inside of your Storybook is the area where two facing pages meet in the center of the book. This is what the Gutter looks like as part of the Design Guide in Studio: 


It is important to know how far you may design into the Binding Area. For more information, click  here or go to



The Copyright Page: 

The very last page of your Storybook is the Copyright page. In the page listing, it is often labeled as "C." The Copyright page can be designed, just like any other page in your Storybook, except for a small white strip at the bottom of the page. This is the copyright area, where the Heritage Makers logo will be printed, along with a small production barcode, the book's project ID, and the Heritage Makers website (or the personal website of your personal publishing consultant or distributor). The copyright page and Heritage Makers logo cannot be removed from your Storybook project. 


This is how the Copyright area appears while designing in Studio. this is to give you an idea of where the white stripe will appear in your finished book. 




This is how the Copyright area will appear in your finished Storybook. The information that is displayed in this area is specific to each book. 



The Leather Cover and Printed Dust Jacket: 

Unlike our other Storybook products, our 13 x 11 Legacy Storybook is bound in high-quality black leather and features a printed dust jacket. Your custom-designed cover is printed on the dust jacket that surrounds the book. In addition to the views shown above, here are a few detailed images of the leather cover and printed dust jacket: 

Note: This upgrade option is available on select other sizes of our Hardbound Storybook products. 



When the dust jacket is removed, the book is simply bound in chic black leather. It is a classic and timeless look. 



Here is a detailed look at the leather cover of a 13 x 11 Legacy Storybook. 



The above photo shows the dust jacket on its own. All sides feature full-bleed printing, which ensures that your custom design extends to every visible angle of the book. Notice the extra-long wings on the interior of the dust jacket, which keep the dust jacket securely on your book, even while the book is open. 

Have more questions? Submit a request


Article is closed for comments.
Powered by Zendesk